Welcome to Shandong Golden Shield Energy saving and environmental Protection Equipment Co., Ltd. website! The company is committed to the development of new high-energy heating/cooling equipment, greenhouse/animal water temperature air conditioning system manufacturers.
Home > News & amp; events > Content

Matters needing attention in the assembly of the cow house fan

  0010010 nbsp; The cattle house fan is assembled according to the standard process, which can reduce the problems in use, but many users cannot strictly follow the standard procedures, resulting in many problems in use. Therefore, the installation and operation specifications are more important. What should be paid attention to during assembly?

  1. It is very important during the debugging process. The number of people present during the debugging process is not less than 2. One person needs to control the power supply, and the other person needs to observe the operation of the device. If any abnormality is found, it is necessary to immediately notify the person who controls the power supply to stop and conduct a detailed inspection. Before confirming that there is no abnormality, the machine cannot be started and operated. The required motor power of the cowshed fan refers to the required power of the centrifugal cooling fan and the cooling air box when the air inlet is fully open under certain working conditions.

  2. When testing the cow house fan, close the valves on the inlet and outlet pipes. After the operation is completed, gradually open the valve until it reaches the required working state, and pay attention to whether the working current exceeds the rated current. This is also a better way to use cooling fans, but for different types of cooling fans assembled by users, there are some differences in the debugging methods. Users should pay attention to debugging and assembly.

  3. Check whether the wiring method is consistent with the wiring diagram. Carefully check whether the operating voltage of the cooling fan power supply meets the requirements, whether the power supply is in phase or in phase, and whether the electrical component capacity meets the requirements. When the normal speed is reached, measure whether the input current is normal, and the working current should not exceed its rated current. If the operating current exceeds its rated current, check whether the supply voltage is normal. In fact, its instruction manual is not so perfect, but in any case, even if the instruction manual is not perfect, we should have a deeper understanding of how to use it. Each part has a more detailed instruction manual, which users need to master.