What you need to know to use aquaculture stoves
0010010 nbsp; 0010010 nbsp; Features of aquaculture hot blast stove:
The furnace heat exchange tube is made of high-silicon, high-manganese, and high-temperature-resistant boiler steel to increase the service life of the hot blast stove.
Exhaust gas heat recovery using tail gas heat recovery device increases the thermal efficiency by more than 90%, and makes the temperature of the flue gas discharged from the chimney low, which is impossible for other hot blast stoves.
The coal ash cleaning and recycling device for breeding hot air furnace can easily clean the coal ash and reduce the clogging of the coal ash.
The large-capacity furnace hall can reduce the number of times of adding coal, which is convenient for heating at night.
The automatic control of furnace temperature and room temperature can realize the harmonization of furnace temperature and room temperature, and constant temperature heating.
Fresh air reduces the occurrence of breeding diseases.
Save labor and reduce labor intensity of workers.
Scope of hot blast stove:
The heating of chickens, ducks, pigs and other animals leaving the house, greenhouses, vegetable greenhouses and other heating plants, wood, tea, food, pasture, chemical products baking workshops, office heating, etc.
Fuel used for breeding hot blast stove:
Lump coal, anthracite coal, firewood can be used,
The water heating is better. The main unit adopts a separate design combining the spiral tube heating technology invented by the factory and the fire separation and anti-burning. It can reach 38 degrees during 2 hours of brooding.
The water used in aquaculture hot-air stoves can be roughly divided into: raw water, water supply, make-up water, pot water, sewage, condensate, etc.
Their concepts are:
1, raw water: also known as raw water or source water, refers to untreated natural water or tap water from the urban water supply network.
2, feed water; refers to the water sent to the boiler after being treated by different water treatment processes.
3, make-up water: refers to the raw water after treatment by different water treatment process, to make up for the boiler water loss
4, boiler water: refers to the water flowing in the evaporation system in the body of the hot water boiler.
5, sewage: In order to change the quality of steam and reduce the scaling of hot water boilers, a part of the boiler water is discharged by the sewage method. This part of the discharged water is called sewage.
6, condensed water: after steam works or heats other substances, the condensed water is called condensate
0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; well, we have introduced the relevant information of the hot blast stove from different aspects above, I believe that through understanding, You can use it better.